Pneumatic drilling autonomous tilting platform

The pneumatic drilling autonomous tilting platform provides a radically different working method for infrastructure work on an incline and is an essential tool for infrastructure work on dam discharge carriers:

• Breaking of the concrete surface
• Precision drilling (location, angle, depth)
• Preparation and pouring of grout mixture in the holes
• Installation of dowels and anchors

The pneumatic drilling autonomous tilting platform was designed to:

• Move up and down the slope of the dam discharge carrier, as required by the platform operator
  
  
• Keep the working platform level while allowing it to move sideways to get closer to the work plane
  
  
• Provide sufficient space for workers to spend the entire working day on the platform
  
  
• Protect worker safety in accordance with the provisions of the Commission de la Santé et de la Sécurité au Travail and other applicable safety regulations.

It also allows for:

• Proper positioning for precision drilling
  
  
• The installation of a concrete mixer for the preparation of the mixture required for dowel anchoring
  
  
• The use of a compressed-air system to clean out the drilled holes before pouring in the grout mixture
  
  
• Drill mast movement over the entire length of the platform, perpendicular to the work plane.